Tripping, for work in series production
Adjustment knob can be unscrewed after setting the tripping torque - an unintentional change of the setpoint torque is thus prevented
the included Torx TAMPER-RESISTANT locking screw also protects against tampering. As well as the enclosed adhesive seal. No adjustment possible without seal breakage.
Receptacle for interchangeable connector tools
Quick release safety lock fast, precise adjustment with QuickSelect quick adjustment, Double stop signal
no reset to "0" is required, as the measuring element is only loaded during the tightening process
Left-hand suit by turning over the plug-in tools
2-component handle with a hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and skydrol)
Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. If necessary Readjustment without disassembly.
Product Name | 96503080 Torque Wrench With Cut-Out 730/80 Fix |
---|---|
Brand | STAHLWILLE |
Country of Manufacture | Japan |
Weight | 0.1000 |
Manufacturer Id | 96503080 |
Product Group | Torque Wrench with Plug-in Ratchet |
Scale Range Nm | 160-800 Nm |
Scale Range ftlb | 120-600 ft.lb |
Inside Square | 22x28 mm |
Overall Length | 1178 mm |
Number of Pieces | 1 |