Usage:
Removal of fine burrs generated around cross-holes where the base thickness is 0.1mm or less.
Polishing inner wall surfaces of cylinders such as screw holes, and removing EDM scale.
Polishing the bottom surface of dead-end holes.
Structure: This rigid fiber rod with high grinding capability is then shapped into a flexible brush to allow soft contact with the workpiece.
Product Name | Alumina Fiber Rod 3 mm x 4 x 3 CH-A12-3M |
---|---|
Brand | XEBEC |
Country of Manufacture | Japan |
Weight | 0.1000 |
Manufacturer Id | CH-A12-3M |
Target Hole Diameter | 5 mm - 8 mm |
Brush Diameter | 3 mm |
Shank Diameter | 3 mm |
Full Length | 120 mm |
Recommended Rotation Speed | 7.000-10.000min-1 |
Max Rotation Speed | 14.000min-1 |