Usage:
Removal of fine burrs generated around cross-holes where the base thickness is 0.1mm or less.
Polishing inner wall surfaces of cylinders such as screw holes, and removing EDM scale.
Polishing the bottom surface of dead-end holes.
Structure: This rigid fiber rod with high grinding capability is then shapped into a flexible brush to allow soft contact with the workpiece.
Product Name | Alumina Fiber Rod 5 mm x 6 x 6 CH-A12-5M |
---|---|
Brand | XEBEC |
Country of Manufacture | Japan |
Weight | 0.1000 |
Manufacturer Id | CH-A12-5M |
Target Hole Diameter | 8 mm - 10 mm |
Brush Diameter | 5 mm |
Shank Diameter | 6 mm |
Full Length | 120 mm |
Recommended Rotation Speed | 8.000-10.000min-1 |
Max Rotation Speed | 14.000min-1 |